Used Cryolipolysis (Fat Freezing) Machines for Sale, With Used Price Ranges by Model

The table above lists asking prices for each model as of November 2026, from AestheticDeviceMarket used price data.

Asking prices are what sellers list, not what a machine sold for, so treat each figure as a starting point for negotiation.

The two generations sit far apart: the original CoolSculpting has a median ask of $3,500, while CoolSculpting Elite has a median ask of $25,000.

Elite asks also vary widely: a 2022 Elite listed with all 12 applicator heads and 58 cycles is asking $39,950, while a 2021 Elite sold as-is with two applicators is listed at $3,250.

Original consoles vary too: a Breeze unit with 4 applicators is listed at $3,500, and a Breeze unit with 5 applicators is asking $14,250.

Used cryolipolysis machines are listed at $2,500 to $53,000 as of November 2026, across the original CoolSculpting and CoolSculpting Elite.

The original CoolSculpting has 9 asking prices from $2,500 to $27,000, and five of them are $3,500 or less.

CoolSculpting Elite has 5 asking prices from $3,250 to $53,000, with a median of $25,000.

The top original ask, $27,000, is a 2016 system listed by a dealer, well above the other eight.

Cryolipolysis machines differ mainly by generation: CoolSculpting Elite has two applicator ports and runs one or two applicators at once, while the original CoolSculpting is the earlier Zeltiq console cleared under 510(k) K120023 in 2012.

Both are cleared for cold-assisted lipolysis of the upper arm, bra fat, back fat, banana roll, thigh, abdomen and flank at a BMI of 30 or less, and of the submental and submandibular areas at a BMI up to 46.2.

All of these are FDA-cleared devices, not FDA-approved.

Allergan bought ZELTIQ Aesthetics on April 28, 2017, and Zeltiq Aesthetics remains the 510(k) holder of record, and many listings name Zeltiq rather than Allergan.

For a side-by-side of the two generations, read CoolSculpting Elite vs Original before you shortlist a unit.

Check the software version, the applicator set and the cycle cards before you pay.

1. Confirm the Elite software version. FDA recall Z-2383-2021 covered CoolSculpting Elite software releases 2.0, 3.0, 3.0.1 and 3.0.2, so ask the seller for a photo of the installed version.
2. Count the applicators against the console. K212707 lists seven applicator models for the Elite, and used Elite applicators are listed at $2,250 each, so a missing one adds real cost.
3. Ask how many cycles the system has run. Sellers state this in some listings, such as a 2023 Elite with under 200 cycles used, so get the figure from the console screen.
4. Get cycle-card ordering confirmed in writing. Allergan sells treatment capacity as cycle cards, so ask Allergan before you pay whether you can order cards for this serial number.
5. Check expiry dates on bundled supplies. Resellers list expired CoolSculpting pretreatment wipes and CoolAdhesive pads, so don't count dated stock as part of the price.

A unit sold untested, like a Breeze listed as state surplus that only powers up, leaves every one of these checks to you.

Confirm the transfer terms for your serial number against what a CoolSculpting transfer costs under Allergan next to other brands before you send a deposit.

The original CoolSculpting is the most-listed cryolipolysis machine in our November 2026 price data, with 9 asking prices from 8 sellers between $2,500 and $27,000.

CoolSculpting Elite follows with 5 asking prices from 5 sellers between $3,250 and $53,000.

Both are Zeltiq systems now sold under Allergan Aesthetics, which lists CoolSculpting and CoolSculpting Elite among its device brands on its US site.

CoolSculpting running costs include cycle cards: Allergan sells CoolSculpting treatment capacity as cards, and GUDID lists a 100-cycle CoolSculpting card.

GUDID lists CoolSculpting cycle cards as prescription (Rx) devices, the same as the Elite control unit.

Cards also change hands on the used market, such as a 24-cycle CoolAdvantage card listed at $7,200 by a dealer as of November 2026.

Compare per-treatment costs with other platforms in the consumables comparison that puts CoolSculpting cycle cards beside other devices.

Cryolipolysis is one branch of body contouring machines, the wider category behind CoolSculpting, next to EMS body sculpting machines, the other body contouring branch after cryolipolysis.