Used Erbium Lasers for Sale, With Used Price Ranges by Model

The table above shows asking prices for each erbium platform, as of November 2026, from AestheticDeviceMarket used price data.

Asking prices are what sellers list, not what a laser sold for, so expect room to negotiate.

Installed modules and age both move the price: a 2010 Sciton Joule 7 with BBL, ProFractional and MicroLaserPeel is listed at $54,000, while a loaded 2023 Joule bank lease return is asking $149,000.

Sciton Halo prices are Joule prices too, because Halo is a module on the Joule platform, not a standalone console.

The same ranges sit beside other models in our price guide that ranks erbium lasers with other used aesthetic devices.

Used erbium lasers are listed at $24,000 to $198,000 as of November 2026, depending on platform, generation and installed modules.

The low end is a 2006 Sciton Profile, upgraded by Sciton to dual-head 2,940 nm ProFractional XC in 2011, listed at $24,000 by a dealer.

The high end is a like-new Sciton Joule X listed at $198,000 by a dealer.

Erbium lasers differ mainly by wavelength: Er:YAG fires at 2,940 nm and is ablative, while 1,540 nm erbium glass is non-ablative.

Halo tunes its 2,940 nm beam from 20 to 100 µm deep and its 1,470 nm beam from 250 to 700 µm, each set on its own.

The Sciton Profile is the Joule's predecessor: Sciton's last Profile 510(k) is from 2008 and its first Joule Multi-Platform 510(k) is from 2011.

Laser surgical instruments for dermatology are Class II devices under 21 CFR 878.4810, so these lasers are FDA-cleared through 510(k), not FDA-approved.

Check that the erbium module is installed, that the model matches the listing, and that the cooling system runs clean before you pay.

1. Confirm the erbium module. A Joule or Profile is priced by the modules on the console, and some listings name only BBL, so ask for the 2,940 nm handpieces or scanners in writing.
2. Classify by model, not by the seller's category. DOTmed sellers have filed a Fotona StarWalker PQX picosecond laser under Erbium, and machines sold as 'Fotona 4D SP Dynamis' by a Chinese factory seller at $10,500–$13,000 are look-alikes, not Fotona systems.
3. Ask for pulse counts per source. Good SP Dynamis listings split them out, such as a 2020 unit listed with 593,200 Er:YAG and 620,000 Nd:YAG pulses.
4. Watch the water check at power-on. Sciton's Joule service sheet puts water level and water flow among the first checks, and a 2010 Joule with a water flow error code is listed at $26,000.
5. Call the manufacturer about service. Sciton publishes no transfer or recertification fee, and Fotona's US support page lists none either, so get the figure in writing first.

For contracts, third-party service and dealer warranties, read warranty and service options for a used Er:YAG or hybrid erbium laser before you send a deposit.

The used Sciton Joule is the most-listed erbium platform in our November 2026 price data, with 6 asking prices from 4 sellers between $49,000 and $198,000.

The Sciton Profile follows with 5 asking prices from 3 sellers, from $24,000 to $49,500.

The Sciton Joule with Halo has 4 asking prices from 3 sellers, from $108,000 to $135,000, and two of the 2015 listings use the same wording and may be the same unit.

The Fotona SP Dynamis has 3 asking prices from 2 sellers, from $53,000 to $90,000, and Fotona's US site now features the SP Dynamis Max.